All of the External MiniSAS Cable interconnect products discussed above

TE's External MiniSAS Cable receptacle assembly is the next-generation SAS high- density and high-speed IO interface. This interface was adopted for the SAS 2.1 standard and proposed for SAS 3.0 standard, and is designed to support 6G and future 12G SAS applications. The assembly is offered in 4x, 8x, and 16x versions. The reduced size of the External MiniSAS Cable system provides additional space for system designers. While a low-profile PCIe card can accept four 4x Mini SAS HD connectors, it can only accept two Mini SAS connectors.The External MiniSAS Cable  (SFF-8087) CABLE 1M connector system has a tworow, rightangle connector operating at 12.0 Gbps per channel. Each connector handles 4 lanes of data for up to 48.0 Gbps of total data throughput. This connector will mate with active copper RF connector and optical cable assemblies, as well as active pluggable modules for extendedlength applications in data centers.

Third, view the cable jacket. Indoor cable jacket generally use poly green vinyl or flame-retardant poly green ethylene or low smoke zero halogen materials. Smooth and bright, high quality appearance and feel good.External MiniSAS Cable Has good flexibility, easy to peel. Poor quality of the cable jacket finish is not good, when stripped, easy to skin and inside the sleeve, Kevlar adhesion, but also note that some products using the sponge instead of aramid materials.HP External Mini SAS 2m Cable Quality black polyethylene outdoor PE sheath of the cable should be used, into the cable skin smooth, bright, uniform thickness, small bubbles. The poor feel of the poor quality of the cable jacket, outer skin is not smooth, even in the presence of the bubble particles, some marking to be rubbed. Due to reasons of raw materials, some cable jacket dense degree of moisture is easy to penetrate.