model depends on the number of core diameter, numerical aperture and wavelength. Single-mode fiber (Single-mode fiber = SMF): only able to transfer a pattern of signal waves, but must be qualified: if I remember that in the materials on the normalized frequency that is called something related to the special needs of core fine point, it is best wavelength of 3,4 times; so single-mode light from the appearance, more than fine multi-mode fiber; single-mode fiber as a mode of transport only, so there is no modal dispersion.the light in which the straight lines, very few reflections Patch cords and pigtails will include laser optimized OM3 fiber, OM2, OM1 and OS1 Simplex Patch Cord tight-buffered fiber or 1.6mm simplex or duplex zip-cord jacketed cable. Jacketed cable shall be http://www.fiberyes.com/os1-simplex compliant with UL1666 (ofnr) or NFPA 262 (OFNP) flare ratings. Spot wires and pigtails shall be RoHS compliant and will meet or exceed requirements of TIA/EIA-568-B. 3. The fiber connectors will exceed the prerequisites of TIA/EIA-455-21A for 500 mating series.
RoHS compliant fiber optic patch cords shall include simplex or duplex LC, SC, ST or MT-RJ connectors, or FJ or keyed FJ plugs or jacks on both ends. RoHS compliant fiber optic pigtails shall include
simplex or duplex LC, SC, ST, or MT-RJ connectors, or FJ or keyed FJ plugs or jacks on one end and open (unterminated) on the other end. Patch cords and pigtails shall include laser optimized OM4, OM3
fiber or OM2, OM1 or OS1 Simplex Patch Cord in 900μm tight-buffered fiber,1.6mm or 3.0mm simplex or duplex zipcord jacketed cable, or 1.8mm duplex zipcord jacketed cable. Jacketed cable shall be compliant with UL 1666 (OFNR) or NFPA 262 (OFNP) flame ratings. Patch cords and pigtails shall meet or exceed requirements of.The fiber connectors shall be FOCIS compliant or compatible, and exceed the requirements of for 500 mating cycles
No comments:
Post a Comment